TP-Link TL-SL5428E User Manual page 212

Choose the menu Pgvyqtm" Ugewtkv{→KR/OCE" Dkpfkpi→CTR" Uecppkpi to load the following
page.
The following entries are displayed on this screen:
Uecppkpi"Qrvkqp"
"
Uvctv"KR"Cfftguu<"
Gpf"KR"Cfftguu<"
XNCP"KF<"
Uecp<"
Uecppkpi"Tguwnv"
"
Ugngev<"
Jquv"Pcog<"
KR"Cfftguu<"
OCE"Cfftguu<"
XNCP"KF<"
Rqtv<"
Rtqvgev"V{rg<"
Eqnnkukqp<"
3504"FJER"Upqqrkpi"
Nowadays, the network is getting larger and more complicated. The amount of the PCs always
exceeds that of the assigned IP addresses. The wireless network and the laptops are widely used
and the locations of the PCs are always changed. Therefore, the corresponding IP address of the
PC should be updated with a few configurations. DHCP （Dynamic Host Configuration Protocol, the
Figure 13-4 ARP Scanning
Specify the Start IP Address.
Specify the End IP Address.
Enter the VLAN ID. If blank, the switch will send the untagged
packets for scanning.
Click the Uecp"button to scan the Hosts in the LAN.
Select the desired entry to be bound or deleted.
Displays the Host Name here.
Displays the IP Address of the Host.
Displays the MAC Address of the Host.
Displays the VLAN ID here.
Displays the number of port connected to the Host.
Displays the Protect Type of the entry.
Displays the Collision status of the entry.

Yctpkpi< Indicates that the collision may be caused by the
MSTP function.

Etkvkecn< Indicates that the entry has a collision with the
other entries.
200