TP-Link TL-SL5428E User Manual page 136

The typical bidirectional link detection process is
○
detection process is
On the FNFR page, you can enable the DLDP state globally and configure the interval of the
advertisement packets and the port shutdown mode. You can also configure the refresh frequency
of the port states and reset the certain port's DLDP state manually.
Choose the menu Gvjgtpgv"QCO→"FNFR→"FNFR"to load the following page.
The following entries are displayed on this screen:
Inqdcn"Eqphki"
"
FNFR"Uvcvg<"
Cfxgt"Kpvgtxcn<"
○ ○
2 → 4 → 6 .
Figure 8-12 DLDP Config
Enable/Disable the DLDP function globally.
Config the interval to send advertisement packets, ranging from 1
to 30 seconds. The default value is 5 seconds.
○ ○ ○
2 → 4 → 5 , and the typical unidirectional link
124