Mac Vlan; Port Enable - TP-Link T1700G-28TQ User Manual

2. When receiving tagged packet, the switch will process it basing on the 802.1Q VLAN. If the
received port is the member of the VLAN to which the tagged packet belongs, the packet will
be forwarded normally. Otherwise, the packet will be discarded.
3. If the MAC address of a Host is classified into 802.1Q VLAN, please set its connected port of
switch to be a member of this 802.1Q VLAN so as to ensure the packets forwarded normally.

7.3.1 MAC VLAN

On this page, you can create MAC VLAN and view the current MAC VLANs in the table.
Choose the menu VLAN→MAC VLAN to load the following page.
The following entries are displayed on this screen:
Create MAC VLAN

MAC Address:
Description:
VLAN ID:
MAC VLAN Table

Select:
MAC Address:
Description:
VLAN ID:
Operation:

7.3.2 Port Enable

On this page, you can enable the port for the MAC VLAN feature. Only the port is enabled, can the
configured MAC VLAN take effect.
Figure 7-7 Create and View MAC VLAN
Enter the MAC address.
Give a description to the MAC address for identification.
Enter the ID number of the MAC VLAN. This VLAN should be one of
the 802.1Q VLANs the ingress port belongs to.
Select the desired entry. It is multi-optional.
Displays the MAC address.
Displays the user-defined description of the MAC address.
Displays the corresponding VLAN ID of the MAC address.
Click the Edit button to modify the settings of the entry. And click the
Modify button to apply your settings.
85