Port Enable; Application Example For Mac Vlan - TP-Link T2600G-28TS User Manual

Operation:

6.3.2 Port Enable

On this page, you can enable the port for the MAC VLAN feature. Only the port is enabled, can the
configured MAC VLAN take effect.
Choose the menu VLAN→MAC VLAN→Port Enable to load the following page.
UNIT:
Select your desired port for MAC VLAN function. All the ports are disabled for MAC VLAN function
by default.
Configuration Procedure:
Step Operation
1 Set the link type for
port.
2 Create VLAN.
3 Create MAC VLAN.
4 Select your desired
ports for MAC VLAN
feature.

6.4 Application Example for MAC VLAN

Network Requirements

Switch A and switch B are connected to meeting room A and meeting room B respectively,

and the two rooms are for all departments;
Notebook A and Notebook B, special for meeting room, are of two different departments;

Click the Edit button to modify the settings of the entry. And click the
Modify button to apply your settings.
Figure 6-8 Enable Port for MAC VLAN
Click 1 to configure the physical ports. Click LAGS to configure the
link aggregation groups.
Description
Required. On the VLAN→802.1Q VLAN→Port Config page, set
the link type for the port basing on its connected device.
Required. On the VLAN→802.1Q VLAN→VLAN Config page,
click the Create button to create a VLAN. Enter the VLAN ID and
the description for the VLAN. Meanwhile, specify its member ports.
Required. On the VLAN→MAC VLAN page, create the MAC VLAN.
For the device in a MAC VLAN, it's required to set its connected port
of switch to be a member of this VLAN so as to ensure the normal
communication.
Required. On the VLAN→MAC VLAN→Port Enable page, select
and enable the desired ports for MAC VLAN feature.
73