Dhcp Snooping - TP-Link TL-SL5428E User Manual
24-port 10/100mbps + 4-port gigabit jetstream l2 managed switch
Hide thumbs
Also See for TL-SL5428E:
- Reference manual (341 pages) ,
- Cli reference manual (320 pages) ,
- User manual (250 pages)
Table of Contents
Advertisement
350403" FJER"Upqqrkpi"
Choose the menu Pgvyqtm"Ugewtkv{→FJER"Upqqrkpi→FJER"Upqqrkpi to load the following
page.
Pqvg<"
If you want to enable the DHCP Snooping feature for the member port of LAG, please ensure the
parameters of all the member ports are the same.
The following entries are displayed on this screen:
FJER"Upqqrkpi"Eqphki"
"
FJER"Upqqrkpi<"
Inqdcn"Hnqy"Eqpvtqn<"
Fgenkpg"Vjtgujqnf<"
Fgenkpg"Hnqy"Eqpvtqn<"
Figure 13-8 DHCP Snooping
Enable/Disable the DHCP Snooping function globally.
Select the value to specify the maximum amount of DHCP
messages that can be forwarded by the switch per second. The
excessive massages will be discarded.
Select the value to specify the minimum transmission rate of the
Decline packets to trigger the Decline protection for the specific
port.
Select the value to specify the Decline Flow Control. The traffic
flow of the corresponding port will be limited to be this value if
the transmission rate of the Decline packets exceeds the
Decline Threshold.
204
Advertisement
Table of Contents
