Choose the menu XNCP→Rtkxcvg"XNCP→Rqtv"Eqphki to load the following page.
The following entries are displayed on this screen:
Rqtv"Eqphki"
"
Rqtv<"
Rqtv"V{rg<"
Rtkoct{"XNCP<"
Ugeqpfct{"XNCP<
Rtkxcvg"XNCP"Rqtv"Vcdng"
"
Rqtv"KF<"
Rqtv"V{rg<"
Qrgtcvkqp<"
Pqvg<"
1.
A Host Port can only join to a Private VLAN.
2.
A Promiscuous Port can only join to a Primary VLAN.
3.
If you want to add a Promiscuous port to different Private VLANs with the same Primary VLAN,
you need to add the Promiscuous port to any one of these Private VLANs.
Eqphkiwtcvkqp"Rtqegfwtg<"
Uvgr" Qrgtcvkqp"
1
Create Private VLAN.
2
Add ports to Private VLAN
3
Modify VLAN.
Figure 6-17 Create and View Protocol Template
Select the desired port for configuration.
Select the Port Type from the pull-down list for the port.
Specify the Primary VLAN the port belongs to.
Specify the Secondary VLAN the port belongs to.
Displays the port number.
Displays the corresponding Port Type.
Click Tgoqxg to delete the port.
Fguetkrvkqp"
Required. On the XNCP→Rtkxcvg" XNCP→RXNCP" Eqphki"
page, Enter the Primary VLAN and Secondary VLAN, and
then click the Etgcvg button.
Required. On the XNCP→Rtkxcvg" XNCP→Rqtv" Eqphki
page, select the desired ports and configure the port types
and click the Cff"button.
Optional. On the XNCP→Rtkxcvg" XNCP→RXNCP" Eqphki
page, select the desired Private VLAN and do the
modification, then click the Crrn{ button to modify the
information of the corresponding VLAN.
84