Port Enable - TP-Link TL-SL5428E User Manual

The following entries are displayed on this screen:
VLAN Table
MAC Address:
Description:
VLAN ID:
MAC VLAN Table
MAC Select:
Select:
MAC Address:
Description:
VLAN ID:
Operation:

8.2.2 Port Enable

On this page, you can enable the port for the MAC VLAN feature. Only the port is enabled, can the
configured MAC VLAN take effect.
Choose the menu "VLAN→MAC VLAN→Port Enable" to load the following page.
Port Enable:
Configuration Procedure:
Step Operation
1 Set the link type for
port.
2 Create VLAN.
Enter the MAC address.
Give a description to the MAC address for identification.
Enter the ID number of the MAC VLAN. This VLAN should be one of the
802.1Q VLANs the ingress port belongs to.
Click the Select button to quick-select the corresponding entry based on
the MAC address you entered.
Select the desired entry. It is multi-optional.
Displays the MAC address.
Displays the user-defined description of the MAC address.
Displays the corresponding VLAN ID of the MAC address.
Click the Edit button to modify the settings of the entry. And click the
Modify button to apply your settings.
Figure 8-8 Enable MAC VLAN for Port
Select your desired port for Protocol VLAN feature. All the ports are
disabled by default.
Description
Required. On the VLAN→802.1Q VLAN→Port Config page, set
the link type for the port basing on its connected device.
Required. On the VLAN→802.1Q VLAN→VLAN Config page,
64