Rtqvqeqn"XNCP"Vcdng"
"
Ugngev<"
Rtqvqeqn<"
Gvjgt"V{rg<"
XNCP"KF<"
Qrgtcvkqp<"
80504"Rtqvqeqn"Vgorncvg"
The Protocol Template should be created before configuring the Protocol VLAN. By default, the
switch has defined the IP Template, ARP Template, RARP Template, etc. You can add more
Protocol Template on this page.
Choose the menu XNCP→Rtqvqeqn"XNCP→Rtqvqeqn"Vgorncvg to load the following page.
The following entries are displayed on this screen:
Etgcvg"Rtqvqeqn"Vgorncvg"
"
Rtqvqeqn"Pcog<"
Gvjgt"V{rg<"
Rtqvqeqn"Vgorncvg"Vcdng"
"
Ugngev<"
Rtqvqeqn"Pcog<"
Gvjgt"V{rg<"
Pqvg<"
The Protocol Template bound to VLAN cannot be deleted.
Select the desired entry. It is multi-optional.
Displays the protocol template of the VLAN.
Displays the Ethernet protocol type field in the protocol template.
Displays the corresponding VLAN ID of the protocol.
Click the Gfkv"button to modify the settings of the entry. And click the
Oqfkh{"button to apply your settings.
Figure 6-10 Create and View Protocol Template
Give a name for the Protocol Template.
Enter the Ethernet protocol type field in the protocol template.
Select the desired entry. It is multi-optional.
Displays the name of the protocol template.
Displays the Ethernet protocol type field in the protocol template.
69