390604" Vtcegtv"
Tracert test function is used to test the connectivity of the gateways during its journey from the
source to destination of the test data. When malfunctions occur to the network, you can locate
trouble spot of the network with this tracert test.
Choose the menu Ockpvgpcpeg→Pgvyqtm"Fkcipquvkeu→Vtcegtv to load the following page.
The following entries are displayed on this screen:
Vtcegtv"Eqphki"
"
Fguvkpcvkqp"KR<" "
Ocz"Jqr<"
Vtcegtv"Tguwnv"
"
Here you can view the Tracert result." "
Figure 17-9 Tracert
Enter the IP address of the destination device. Both IPv4 and IPv6 are
supported.
Specify the maximum number of the route hops the test data can pass
through.
287
Return to CONTENTS