TP-Link TL-SL5428E User Manual page 222

Choose the menu Pgvyqtm"Ugewtkv{→CTR"Kpurgevkqp→CTR"Fgvgev to load the following page.
The following entries are displayed on this screen:
CTR"Fgvgev"
"
CTR"Fgvgev<"
Vtwuvgf"Rqtv"
"
Vtwuvgf"Rqtv<"
Eqphkiwtcvkqp"Rtqegfwtg<"
Uvgr" Qrgtcvkqp"
1 Bind the IP address, MAC
address, VLAN ID and the
connected Port number of
the Host together.
2 Enable the protection for the
bound entry.
3 Specify the trusted port.
4 Enable ARP Detect feature.
Figure 13-14 ARP Detect
Enable/Disable the ARP Detect function, and click the Crrn{
button to apply."
Select the port for which the ARP Detect function is unnecessary
as the Trusted Port.
routing port and LAG port, should be set as Trusted Port. To
ensure the normal communication of the switch, please
configure the ARP Trusted Port before enabling the ARP Detect
function.
Fguetkrvkqp"
Required. On the KR/OCE" Dkpfkpi page, bind the IP
address, MAC address, VLAN ID and the connected Port
number of the Host together via Manual Binding, ARP
Scanning or DHCP Snooping.
Required. On
Dkpfkpi→Dkpfkpi"Vcdng page, specify a protect type for
the corresponding bound entry.
Required. On
Kpurgevkqp→CTR"Fgvgev page, specify the trusted port.
The specific ports, such as up-linked port, routing port
and LAG port, should be set as Trusted Port.
Required. On
Kpurgevkqp→CTR" Fgvgev page, enable the ARP Detect
feature.
210
The specific ports, such as up-linked port,
the
Pgvyqtm"
the
Pgvyqtm"
the
Pgvyqtm"
Ugewtkv{→KR/OCE"
Ugewtkv{→CTR"
Ugewtkv{→CTR"