380305" PFR"Eqphki"
On this page you can configure the NDP function for the switch.
Choose the menu Enwuvgt→PFR→PFR"Eqphki"to load the following page.
The following entries are displayed on this screen:
Inqdcn"Eqphki"
"
PFR<"
Cikpi"Vkog<"
Jgnnq"Vkog<"
Rqtv"Eqphki"
"
Ugngev<"
Rqtv<"
PFR<"
Gpcdng<"
Fkucdng<"
Figure 16-4 NDP Config
Enable/Disable NDP function globally.
Enter the period for the neighbor switch to keep the NDP packets
from this switch.
Enter the interval to send NDP packets.
Select the desired port to configure its NDP status.
Displays the port number of the switch.
Displays NDP status of the current port.
Click the Gpcdng button to enable NDP for the port you select.
Click the Fkucdng button to disable NDP for the port you select.
266