The configuration procedure for switch E and F is the same with that for switch D.
Vjg"vqrqnqi{"fkcitco"qh"vjg"vyq"kpuvcpegu"chvgt"vjg"vqrqnqi{"ku"uvcdng" "
For Instance 1 (VLAN 101, 103 and 105), the red paths in the following figure are connected
links; the gray paths are the blocked links.
For Instance 2 (VLAN 102, 104 and 106), the blue paths in the following figure are connected
links; the gray paths are the blocked links.
Uwiiguvkqp"hqt"Eqphkiwtcvkqp" "
Enable TC Protect function for all the ports of switches.
Enable Root Protect function for all the ports of root bridges.
Enable Loop Protect function for the non-edge ports.
Enable BPDU Protect function or BPDU Filter function for the edge ports which are connected to
the PC and server.
109
Return to CONTENTS