TP-Link TL-SL5428E User Manual page 57

Ugngev<"
Rqtv<"
Uvcvwu<"
Qrgtcvkqp"Oqfg<""
Tgeqxgt{"Oqfg<"
Nqqr"Uvcvwu<"
Dnqem"Uvcvwu<"
NCI<"
Ocpwcn"Tgeqxgt<"
Pqvg<"
1. Recovery Mode is not selectable when Alert is chosen in Operation Mode.
2. Loopback Detection must coordinate with storm control.
704" NCI"
LAG (Link Aggregation Group) is to combine a number of ports together to make a single
high-bandwidth data path, so as to implement the traffic load sharing among the member ports in
the group and to enhance the connection reliability.
For the member ports in an aggregation group, their basic configuration must be the same. The
basic configuration includes UVR,"SqU, IXTR, XNCP, rqtv"cvvtkdwvgu, OCE"Cfftguu"Ngctpkpi"
oqfg and other associated settings. The further explains are as following:
If the ports, which are enabled for the IXTR, :2403S"XNCP, Xqkeg"XNCP, UVR, SqU,"Rqtv"

Kuqncvkqp," FJER"Upqqrkpi and Rqtv"Eqphkiwtcvkqp (Urggf,"Hnqy"Eqpvtqn), are in a LAG,
their configurations should be the same.
The ports, which are enabled for the Rqtv" Ugewtkv{, Rqtv" Okttqt, OCE" Cfftguu" Hknvgtkpi,

Uvcvke"OCE"Cfftguu"Dkpfkpi,":2403Z"Cwvjgpvkecvkqp,"KR"Uqwteg"Iwctf, and jcnh/fwrngz"
cannot be added to the LAG.
It's not suggested to add the ports with CTR" Kpurgevkqp and FqU" Fghgpf enabled to the

LAG.
If the LAG is needed, you are suggested to configure the LAG function here before configuring the
other functions for the member ports.
Select the desired port for Loopback Detection configuration. It is
multi-optional.
Displays the port number.
Enable or disable Loopback Detection function for the port.
Select the mode how the switch processes the detected loops.
Cngtv<"When a loop is detected, display an alert.

Rqtv" dcugf< When a loop is detected, display an alert and

block the port.
Select the mode how the blocked port recovers to normal status.
Cwvq< Block status can be automatically removed after

recovery time.
Ocpwcn<"Block status only can be removed manually.

Displays the port status whether a loopback is detected.
Displays the port status about block or unblock.
Displays the LAG number the port belongs to.
Manually remove the block status of selected ports.
45