TP-Link TL-SL5428E User Manual page 163

Gttqt"Rcemgv<"
32030:" Swgtkgt"Eqphki"
In an IPv4 multicast network that runs IGMP, a Layer 3 multicast device works as an IGMP querier
to send IGMP queries and manage the multicast table. But IGMP is not supported by the devices
in Layer 2 network. IGMP Snooping Querier can act as an IGMP Router in Layer 2 network. It can
help to create and maintain multicast forwarding table on the switch with the Query messages it
generates.
Choose the menu"Ownvkecuv→Swgtkgt to load the following page."
The following entries are displayed on this screen:
KIOR"Upqqrkpi"Swgtkgt"Eqphki"
"
XNCP"KF<"
Swgt{"Kpvgtxcn<"
Ocz"Tgurqpug"
Vkog<"
Igpgtcn"Swgt{"
Uqwteg"KR<"
Ncuv"Ogodgt"Swgt{"
Kpvgtxcn<"
Displays the number of error packets the port received.
Figure 10-12 Packet Statistics
Enter the ID of the VLAN that enables IGMP Snooping Querier.
Enter the time interval of sending a general query frame by IGMP
Snooping Querier.
Enter the maximal time for the host to respond to a general query
frame sent by IGMP Snooping Querier.
Enter the source IP of the general query frame sent by IGMP
Snooping Querier. It should not be a multicast IP or a broadcast IP.
Enter the time interval of sending specific query frames by IGMP
Snooping Querier. A specific query will be sent on condition that
"fast-leave" is not enabled and a leave frame is received.
151