TP-Link TL-SL5428E User Manual page 130

Vjtgujqnf<"
Ykpfqy<"
Pqvkh{<"
:05" THK"
On this page, you can choose whether to notify the link faults like dying gasp and critical event.
Choose the menu"Gvjgtpgv"QCO→THK→Tgoqvg"Hcknwtg"Kpfkecvkqp"to load the following page."
The following entries are displayed on this screen:
Tgoqvg"Hcknwtg"Kpfkecvkqp"Eqphki"
"
Rqtv"Ugngev<"
Specify the threshold for the selected link event.
For Symbol Period Error, it is the number of error symbols in

the period that is required to be exceeded.
For Frame Error, it is the number of error frames in the period

(measured by 100ms) that is required to be exceeded.
For Frame Period Error, it is the number of error frames in the

period (measured by frames) that is required to be exceeded.
For Frame Seconds Error, it is the number of error frame

seconds in the period that is required to be exceeded.
Specify the detection period.
For Frame Period Error, the period is specified by a number of

received frames.
For other link events, the period is specified by a time interval.

Choose whether to notify the selected link event or not.
Figure 8-7 Remote Failure Indication
Click the Ugngev" button to quick-select the corresponding port
based on the port number you entered.
118