Configuring Ip Filters; Figure 6-4 Network > Ip Filter Ruleset (Adding/Editing Rulesets) - Lantronix SLC 8000 User Manual

Configuring IP Filters

The administrator can add, edit, delete, and map IP filters.
Note: A configured filter has no effect until it is mapped to a network interface.
See Mapping Rulesets on page 75.
To add an IP filter:
1. On the Network > IP Filter
Rulesets can be added or updated on this page.
2. Enter the following:
Ruleset Name
SLC™ 8000 Advanced Console Manager User Guide
page, click the Add Ruleset button. The following page displays:
Figure 6-4 Network > IP Filter Ruleset (Adding/Editing Rulesets)
Name that identifies a filter; may be composed of letters, numbers, and hyphens
only. (The name cannot start with a hyphen.)
Example:
FILTER-2
6: Basic Parameters
76