Lantronix SLC 8000 User Manual page 255

Escape Sequence
Break Sequence
Custom Menu
Display Menu at Login
3. Select or clear the checkboxes for the following rights:
Full Administrative
Networking
Services
Secure Lantronix
Network
Date/Time
Reboot & Shutdown
Local Users
Remote
Authentication
SSH Keys
User Menus
Web Access
Diagnostics &
Reports
Firmware &
Configuration
Internal Modem
Device Port
Operations
Device Port
Configuration
USB
SD Card
RPM
4. Click the Add Group button.
SLC™ 8000 Advanced Console Manager User Guide
A single character or a two-character sequence that causes the SLC 8000
advanced console manager to leave direct (interactive) mode. (To leave
listen mode, press any key.)
A suggested value is Esc+A (escape key, then uppercase "A" performed
quickly but not simultaneously). You would specify this value as \x1bA, which
is hexadecimal (\x) character 27 (1B) followed by an A.
This setting allows the user to terminate the
on the command line interface when the endpoint of the command is
,
deviceport tcp
A series of one to ten characters users can enter on the command line
interface to send a break signal to the external device. A suggested value is
Esc+B (escape key, then uppercase "B" performed quickly but not
simultaneously). You would specify this value as \x1bB, which is
hexadecimal (\x) character 27 (1B) followed by a B.
If custom menus have been created you can assign a default custom menu
to the group. See Custom Menus
Check the checkbox to display the menu at login.
Right to add, update, and delete all editable fields.
Right to enter Network settings.
Right to enable and disable system logging, SSH and Telnet logins, SNMP, and
SMTP.
Right to view and manage Secure Lantronix units (e.g., Spider, or SLC units) on
the local subnet.
Right to set the date and time.
Right to shut down and reboot the SLC unit.
Right to add or delete local users on the system.
Right to assign a remote user to a user group and assign a set of rights to the user.
Right to set SSH keys for authenticating users.
Right to create a custom user menu for the CLI.
Right to access Web-Manager.
Right to obtain diagnostic information and reports about the unit.
Right to upgrade the firmware on the unit and save or restore a configuration (all
settings). Selecting this option automatically selects Reboot & Shutdown.
Right to update internal modem settings.
Right to control device ports.
Right to enter device port settings.
Right to enter modem settings for USB devices and control USB storage devices.
Right to enter settings for SD card.
Right to manage and control remote power managers.
connect direct
, or .
udp
for more information.
12: User Authentication
command
255