System Log Command; Figure 13-4 System Logs - Lantronix SLC 8000 User Manual

Ending at
3. Click the View Log button. Your specified system log displays. For example, if you select the
type All and the level Error, the SLC unit displays a log similar to this:
From a queried system log (e.g.,
individual or to Lantronix Technical Support. See
To clear system logs:
1. From the Maintenance > System Logs
2. Click the Clear Log button to clear all log information.

System Log Command

The following command for the command line interface corresponds to the web page entries
described above.
To view the system logs containing information and error messages:
show syslog [<parameters>]
Parameters
[email <Email Address>]
SLC™ 8000 Advanced Console Manager User Guide
Select the endpoint of the range you want to view:
End of Log: to view the log from the latest available ending time and date.

Date: to view the log up to the last available log ending date and time.


Figure 13-4 System Logs

Figure 13-4), you may email this information to a specific
page, select Maintenance - System Logs.
Emailing Logs and Reports (on page
13: Maintenance
293).
282