V1/V2C Communities; Version 3; V3 User Read-Only; V3 User Read-Write - Lantronix SLC 8000 User Manual

v1/v2c Communities

Read-Only
Read-Write
Trap

Version 3

Security
Auth with
Encrypt with

V3 User Read-Only

User Name
Password/Retype
Password
Passphrase/
Retype
Passphrase

V3 User Read-Write

User Name
Password/
Retype Password
Passphrase/
Retype
Passphrase

V3 User Trap

User Name
SLC™ 8000 Advanced Console Manager User Guide
A string that SNMP agent provides. The default is public.
A string that acts like a password for an SNMP manager to access the read-only data
from the SLC unit SNMP, like a password for an SNMP manager to access the read-
only data the SLC SNMP agent provides, and to modify data where permitted. The
default is private.
The trap used for outgoing generic and enterprise traps. Traps sent with the Event
trigger mechanism still use the trap community specified with the Event action. The
default is public.
Levels of security available with SNMP v. 3.
No Auth/No Encrypt: No authentication or encryption.

Auth/No Encrypt: Authentication but no encryption. (default)

Auth/Encrypt: Authentication and encryption.

For Auth/No Encryp or Auth/Encrypt, the authentication method:
MD5: Message-Digest algorithm 5 (default)

SHA: Secure Hash Algorithm

Encryption standard to use:
DES: Data Encryption Standard (default)

AES: Advanced Encryption Standard

SNMP v3 is secure and requires user-based authorization to access
Enter a user ID. The default is snmpuser. Up to 20 characters.
Password for a user with read-only authority to use to access SNMP v3. The default is
SNMPPASS. Up to 20 characters.
Passphrase associated with the password for a user with read-only authority. Up to 20
characters. If this is not specified it will default to the v3 Read-Only Password.
SNMP v3 is secure and requires user-based authorization to access
Enter a user ID for users with read-write authority. The default is snmprwuser. Up to
20 characters.
Password for the user with read-write authority to use to access SNMP v3. The default
is SNMPRWPASS. Up to 20 characters.
Passphrase associated with the password for a user with read-write authority. Up to 20
characters. If this is not specified it will default to the v3 Read-Write Password.
SNMP v3 is secure and requires user-based authorization to access SLC unit MIB
objects. Enter a user ID for users with authority to send traps. The default is
snmptrapuser. Up to 20 characters.
7: Services
SLC
MIB objects.
SLC
MIB objects.
96