Banners; Figure 13-15 Maintenance > Banners - Lantronix SLC 8000 User Manual
Advanced console manager
Hide thumbs
Also See for SLC 8000:
- User manual (337 pages) ,
- Quick start manual (4 pages) ,
- User manual (425 pages)
Table of Contents
Advertisement
Banners
The
Maintenance > Banners
that display to users.
To configure banner settings:
1. Click the Maintenance tab and select Banners option.
2. Enter the following fields.
Welcome Banner
Login Banner
Logout Banner
SSH Banner
3. Click Apply to save.
SLC™ 8000 Advanced Console Manager User Guide
page allows the system administrator to customize text messages
Figure 13-15 Maintenance > Banners
The text to display on the command line interface before the user logs in. May
contain up to 1024 characters. Single quote and double quote characters are not
supported. Welcome to the SLC is the default.
Note:
To create more lines use the \n character sequence.
The text to display on the command line interface after the user logs in. May
contain up to 1024 characters. Single quote and double quote characters are not
supported. Default is blank.
Note:
To create more lines, use the \n character sequence.
The text to display on the command line interface after the user logs out. May
contain up to 1024 characters. Single quote and double quote characters are not
supported. Default is blank.
Note:
To create more lines use, the \n character sequence.
The text to display when a user logs into the SLC via SSH, prior to authentication.
May contain up to 1024 characters. Single quote and double quote characters are
not supported. Blank by default.
Note:
To create more lines use the \n character sequence.
13: Maintenance
301
Advertisement
Table of Contents
Need help?
Do you have a question about the SLC 8000 and is the answer not in the manual?
Questions and answers