Usb Commands; Sd Card Commands - Lantronix SLC 8000 User Manual

Note: The Delete, Download, and Rename options are at the bottom of the page
2. To delete a file, click the check box next to the filename and click Delete File. A confirmation
message displays.
3. To download a file, click the Download File button. Select the file from the list.
4. To rename a file, click the check box next to the filename and enter a new name in the New
File Name field.
5. Click Rename File.

USB Commands

The following CLI commands correspond to the USB port. For more information,
see Chapter 15: Command Reference on page
set usb access

 set usb modem
 set usb storage mount
 set usb storage unmount
 set usb storage dir
 set usb storage rename
 set usb storage copy
 set usb storage delete
 set usb storage format
 set usb storage fsck
show usb

 show usb storage
 show usb modem
 show usb devices

SD Card Commands

The following CLI commands correspond to the SD Card. For more information,
see Chapter 15: Command Reference on page
 set sdcard access
 set sdcard mount
 set sdcard unmount
 set sdcard format
 set sdcard fsck
 set sdcard dir
set sdcard rename

 set sdcard copy
 set sdcard delete
 show sdcard
SLC™ 8000 Advanced Console Manager User Guide
308.
308.
9: USB/SD Card Port
(Figure 9-5).
192