Local And Remote User Settings; Figure 12-3 User Authentication > Local/Remote Users - Lantronix SLC 8000 User Manual

Local and Remote User Settings

The system administrator can configure the SLC 8000 advanced console manager to use local
accounts and remote accounts to authenticate users.
1. Click the User Authentication tab and select the Local/Remote Users option. The following
page displays.
The top of the page has entry fields for enabling local and remote users and for setting
password requirements. The bottom of the page displays a table listing and describing all local
and remote users.
To enable local and/or remote users:
1) Enter the following:
Enable Local Users
Multiple Sysadmin
Web Logins
Sysadmin Access
Limited to Console
Port
Authenticate only
remote users who are
in the remote users list
SLC™ 8000 Advanced Console Manager User Guide
Figure 12-3 User Authentication > Local/Remote Users
Select to enable all local users except sysadmin. The sysadmin is always
available regardless of how you set the check box. Enabled by default.
Select to allow the sysadmin to have multiple simultaneous logins to the web
interface. Disabled by default.
Select to limit sysadmin logins to the Console Port only. Disabled by default.
Select the check box to authenticate users listed in the Remote Users list in the
lower part of the page. Disabled by default.
12: User Authentication
221