Lantronix SLC 8000 User Manual page 354

15: Command Reference
diag top
Syntax
diag top [parameters]
Description
Displays CPU usage, memory usage and tasks.
Parameters
continuous <enable|disable>
count <Number of Iterations to Display>
delay <Delay in Seconds>
numlines <Number of Lines to Display>
Defaults:
count=1, delay = 5 seconds
diag traceroute
Syntax
diag traceroute <IP Address or Hostname>
Description
Displays the route that packets take to get to a network host.
diag usb
Syntax
diag usb [<parameters>]
Description
To display information about USB buses and the devices connected to them, including the
mapping between a USB device and the SLC port. For "mapdevice enable", the port numbers will
displayed at the end of the line in square brackets.
Parameters
treedisplay <enable|disable>
mapdevice <enable|disable>
email <Email Address>
Defaults: treedisplay=enable
SLC™ 8000 Advanced Console Manager User Guide 354