Diagnostics; Figure 13-7 Maintenance > Diagnostics - Lantronix SLC 8000 User Manual

Diagnostics

The Maintenance > Diagnostics
connectivity and device port input/output problems. You can use equivalent commands on the
command line interface.
1. Click the Maintenance tab and select the Diagnostics option. The following page displays:
2. Select Diagnostics from checklist (one or more diagnostic methods you want to run, or select
All to run them all):
IPv4 ARP Table
IPv6 Neighbor
Table
Netstat
SLC™ 8000 Advanced Console Manager User Guide
page provides methods for diagnosing problems such as network
Figure 13-7 Maintenance > Diagnostics
The IPv4 Address Resolution Protocol (ARP) table used to view the IP address-to-
hardware address mapping.
The IPv6 Neighbor table is used to view a list of neighbor's IPv6 addresses on the same
network, and their corresponding MAC addresses.
Displays network connections. If you select the checkbox, select the TCP or UDP protocol,
or select All for both protocols to control the output of the Netstat report.
13: Maintenance
286