2. View, add, or update the following:
Host List Id
Host List Name
Retry Count
Authentication
Host Parameters
Host
Protocol
Port
Escape Sequence
SLC™ 8000 Advanced Console Manager User Guide
Figure 8-14 View Host Lists
Displays after a host list is saved.
Enter a name for the host list.
Enter the number of times the SLC 8000 advanced console manager should
attempt to retry connecting to the host list.
Select to require authentication when the SLC unit connects to a host.
Name or IP address of the host.
Protocol for connecting to the host (TCP, SSH, or Telnet).
Port on the host to connect to SLC advanced console manager
The escape character used to get the attention of the SSH or Telnet client. It is
optional, and if not specified, Telnet and SSH use their default escape character.
For Telnet, the escape character is either a single character or a two-character
sequence consisting of '^' followed by one character. If the second character is '?',
the DEL character is selected. Otherwise, the second character is converted to a
control character and used as the escape character.
For SSH, the escape character is a single character.
8: Device Ports
157
Need help?
Do you have a question about the SLC 8000 and is the answer not in the manual?