Device Ports - Rpms - Add Device - Lantronix SLC 8000 User Manual

Outlet
Name
State
Action
4. To save, click Apply.

Device Ports - RPMs - Add Device

On the Devices > Device Ports
configure a new managed remote power manager (RPM) for the SLC configuration.
To add a new managed RPM :
1. Connect to a specific port on the Devices > Device Ports page according to instructions in
To open the Device Ports - Settings page: (on page
2. In the Connected to drop-down menu above the IP Settings section of the
Device Ports > Settings
3. Click the Add RPM link. The
Note: The
Devices > RPMs
4. Update the configuration settings on this page according to directions in
RPMs - Add Device (on page
SLC™ 8000 Advanced Console Manager User Guide
For each managed power supply, enter the outlet on the selected RPM. As an aid to
selecting the outlet, click the View Outlets button, then select an outlet from the list
and click the Select Outlet button. The managed power supply outlet number will be
filled in, as well as the managed power supply outlet name if a name is listed for the
outlet and one has not already been defined for the managed power supply. A
unique name for the managed power supply name is required; this is what will be
displayed on the Power Management menu.
For each managed power supply, enter the name on the selected RPM. As an aid to
selecting the name, click the View Outlets button, then select an outlet from the list
and click the Select Outlet button. The managed power supply outlet number will be
filled in, as well as the managed power supply outlet name if a name is listed for the
outlet and one has not already been defined for the managed power supply. A
unique name for the managed power supply name is required; this is what will be
displayed on the Power Management menu.
Displays the current state of the outlet when the Device Ports - Power Management
web page is loaded: on, off or unknown if the RPM does not provide status for
individual outlets or the SLC was unable to obtain the status of the outlet.
The action to take on the outlet: Cycle Power, On or Off.
page, access the
page, select RPM.
Device Ports > RPMs - Add Device
Device Ports > RPMs - Add Device
page.
196).
Device Ports > RPMs - Add Device
123).
page displays.
page can also be accessed via the
8: Device Ports
page to
135