Events Commands - Lantronix SLC 8000 User Manual

Events Commands

admin events add
Syntax
admin events add <trigger> <response>
<trigger> is one of:
dpdatadrop, humidlimit, pingfails, receivetrap, rpmload,
nomodemdialor templimit.
<response> is one of:
action syslog
action emailalert emailaddress <destination email address>
action snmptrap nms <SNMP NMS> community <SNMP Community>
action <fwdalltrapseth|fwdseltrapeth> ethport <1|2> nms <SNMP NMS>
community <SNMP Community> [oid <SNMP OID>]
action <fwdalltrapsmodem|fwdseltrapmodem> deviceport <Device Port #
or Name> nms <SNMP NMS> community <SNMP Community> [oid <SNMP Trap
OID>]
action <fwdalltrapsmodem|fwdseltrapmodem> usbport <U1|U2>
nms <SNMP NMS> community <SNMP Community> [oid <SNMP Trap OID>]
action <fwdalltrapsmodem|fwdseltrapmodem> internal modem
nms <SNMP NMS> community <SNMP Community> [oid <SNMP Trap OID>]
Description
Defines events.
admin events delete
Syntax
admin events delete <Event ID>
Description
Deletes an event definition.
admin events edit
Syntax
admin events edit <Event ID> <parameters>
SLC™ 8000 Advanced Console Manager User Guide
15: Command Reference
355