Internal Modem Settings; Setting Up Internal Modem Storage - Lantronix SLC 8000 User Manual

Internal Modem Settings

This section describes how to configure an internal modem in the SLC advanced console
manager. The SLC 8000 internal modem is an optional part. If the modem is installed, a message
will be displayed when the SLC unit is booted:
Internal modem installed.
The presence of the modem will also be displayed in the CLI admin version command, the
web About SLC
subset of the modem functionality available for modems connected to a Device Port and USB
modems. If the internal modem is installed, the Internal Modem web page can be displayed by
selecting the Internal Modem option from the main menu, or by selecting the MD button in the
Sample Dashboards
Note: The internal modem only supports Dial-in, Dial-out and Dial-back.

Setting Up Internal Modem Storage

An internal modem may be configured on the
through the Sample Dashboards
manager. .
To set up internal modem storage in the SLC 8000 advanced console manager:
1. Insert an internal modem into the SLC unit according to the instructions in
(on page 41).
Note: Your internal modem will appear in the
hand corner once the SLC unit is reboots.
2. Reboot the SLC 8000 advanced console manager.
3. Log into the SLC unit and click Devices.
4. Click Internal Modem.
SLC™ 8000 Advanced Console Manager User Guide
page, and the System Configuration report. The internal modem provides a
on the upper right corner of the web page.
only if it is installed into the SLC 8000 advanced console
Figure 8-12 shows the page that displays.
Devices > Internal Modem
Sample Dashboards
8: Device Ports
page and accessed
Modem Installation
in the upper right
150