Table 4-3 Lcd Arrow Keypad Actions; Table 4-4 Front Panel Setup Options With Associated Parameters - Lantronix SLC 8000 User Manual

The following table lists the SLC navigation actions, buttons, and options.
Button
Right arrow
Left arrow
Enter (center button)
Up and down arrows
Right or left arrows
Enter
Up and down arrows

Table 4-4 Front Panel Setup Options with Associated Parameters

Current Eth1
Time Network
Settings
User ID & Eth1 IP
Current Address
TIme
Up/
Down
Arrow
Eth1
Subnet
Mask
Gateway
DNS1
DNS2
DNS3
Note: The individual screens listed from left to right in
disabled for display on the SLC LCD screen. The order of appearance of the screens, if
enabled, along with the elected "Home Page" may vary on the LCD monitor according to
configuration. The internal temperature, user strings, location and device ports LCD
menus are disabled by default. See
enabling and disabling screens.
SLC™ 8000 Advanced Console Manager User Guide

Table 4-3 LCD Arrow Keypad Actions

Action
To move to the next option (e.g., from Network Settings to Console Settings)
To return to the previous option
To enter edit mode
Within edit mode, to increase or decrease a numerical entry
Within edit mode, to move the cursor right or left
To exit edit mode
To scroll up or down the list of parameters within an option (e.g., from IP
Address to Mask)
Left/Right Arrow
Console Date / Release
Port Time
Settings Settings
Baud Rate, Time Zone Firmware
Data Bits, version and
Stop Bits, date code
Parity, (display
Flow only)
Control
Data Bits Date/Time Restore
Factory
Defaults
Stop Bits
Parity
Flow
Control
LCD/Keypad (on page 299)
Internal User Location
Temp Strings
Reading in Displays Indicates
Celsius & configured the Rack
Fahrenheit user (RK), Row
string(s), if (RW) &
any. Cluster
(CW)
locations.
Table 4-4 can be enabled or
for instructions on
4: Quick Setup
Device
Ports
Detects the
connection
state of each
port:
0=No DSR
input signal
detected on
device port
1=DSR input
signal
detected on
device port
50