Events; Figure 13-13 Maintenance > Events - Lantronix SLC 8000 User Manual

Events

On this Maintenance > Events
may occur in the SLC unit.
1. Click the Maintenance tab and select the Events option. The following page displays:
2. Enter the following:
Event Trigger
Host to Ping
RPM
SLC™ 8000 Advanced Console Manager User Guide
page, you can define what action you want to take for events that
Figure 13-13 Maintenance > Events
From the drop-down list, select the type of incident that triggers an event. Currently,
the options are:
Receive Trap

Temperature Over/Under Limit (for Sensorsoft devices)

Humidity Over/Under Limit (for Sensorsoft devices)

Device Port Data Drop

No Internal Modem Dial Tone

Ping Host Fails

RPM Load Over Threshold

When the trigger is set to Ping Host Fails, enter the hostname, IPv4 address or
IPv6 address of the host to ping. The host will be pinged every 2 minutes.
When the trigger is set to RPM Load over Threshold, select the RPM that will be
monitored for a current that exceeds a defined threshold. The RPM needs to
support providing a current level as part of its status information. The RPM current
will be checked every 2 minutes.
13: Maintenance
296