Lantronix SLC 8000 User Manual page 364

15: Command Reference
set network dnsipv4prec
Syntax
set network dnsipv4prec <enable|disable>
Description
Configures IPv4/IPv6 lookup precedence.
set network gateway
Syntax
set network gateway <parameters>
Parameters
default <IP Address>
ipv6default <IPv6 Address>
precedence <dhcp|default>
alternate <IP Address>
pingip <IP Address>
ethport <1 or 2>
pingdelay <1-250 seconds>
failedpings <1-250>
Description
Sets default and alternate gateways. The alternate gateway is used if an IP address usually
accessible through the default gateway fails to return one or more pings.
set network host
Syntax
set network host <Hostname> [domain <Domain Name>]
Description
Sets the SLC host name and domain name.
set network port
Syntax
set network port <1|2> <parameters>
Parameters
state <dhcp|bootp|static|disable> [ipaddr <IP Address> mask <Mask>]
ipv6addr <IPv6 Address/Prefix>
SLC™ 8000 Advanced Console Manager User Guide 364