Figure 7-7 Ssh Or Telnet Cli Session - Lantronix SLC 8000 User Manual

To directly access a specific port on a particular device:
1. You have two options:
- Dashboard
Make sure the WebSSH (DP only) radio button directly beneath the Dashboard is
selected and click the desired port number. The Dashboard is located on the upper right
corner of each Web Manager page (see
window appears.
Note:
60 as the dashboard may vary in appearance.
- Secure Lantronix Page
Click the Services tab, then click the Secure Lantronix Network link (see
Select the port you want to configure. Enabled port numbers are in bright green boxes and
will allow you to select either a WebSSH or a WebTelnet session. If enabled, an SSH or
Telnet popup window appears depending on what is clicked. For SLC console managers
with 7.2.0.0 firmware releases and earlier, an SSH or Telnet popup window for Java
SLC™ 8000 Advanced Console Manager User Guide

Figure 7-7 SSH or Telnet CLI Session

WebTelnet is not available from the Dashboard. See
Chapter 5: Web Page Layout.) An SSH popup
Dashboard on page
7: Services
Figure 7-4.)
104