Figure 4-9 Quick Setup Completed In Cli - Lantronix SLC 8000 User Manual

CLI Quick Setup
Settings
Domain
Time Zone
Date/Time
Sysadmin
password
After you complete the Quick Setup script, the changes take effect immediately.
Welcome to the Lantronix SLC8000 Advanced Console Manager
Model Number: SLC8032
Quick Setup will now step you through configuring a few basic settings.
The current settings are shown in brackets ('[]').
You can accept the current setting for each question by pressing
<return>.
____Ethernet Port and Default Gateway___________________________________
The SLC8032 has two ethernet ports, Eth1 and Eth2.
By default, both ports are configured for DHCP.
Configure Eth1:
Enter 1-3: [1]
The SLC8032 can be configured to use a default gateway.
Enter gateway IP Address: [none]
____Hostname____________________________________________________________
The current hostname is 'slc0348', and the current domain is
'<undefined>'.
The hostname will be shown in the CLI prompt.
Specify a hostname: [slc0348]
Specify a domain: [<undefined>]
____Time Zone___________________________________________________________
The current time zone is 'GMT'.
Enter time zone: [GMT]
SLC™ 8000 Advanced Console Manager User Guide
Description
If desired, specify a domain name (for example, support.lantronix.com). The domain
name is used for host name resolution within the SLC unit. For example, if abcd is
specified for the SMTP server, and mydomain.com is specified for the domain, if
abcd cannot be resolved, the SLC 8000 advanced console manager attempts to
resolve abcd.mydomain.com for the SMTP server.
If the time zone displayed is incorrect, enter the correct time zone and press Enter. If
the entry is not a valid time zone, the system guides you through selecting a time
zone. A list of valid regions and countries displays. At the prompts, enter the correct
region and country.
If the date and time displayed are correct, type n and continue. If the date and time
are incorrect, type y and enter the correct date and time in the formats shown at the
prompts.
Enter a new sysadmin password.

Figure 4-9 Quick Setup Completed in CLI

(1) obtain IP Address from DHCP
(2) obtain IP Address from BOOTP
(3) static IP Address
4: Quick Setup
57