Events; Figure 12-13 Maintenance > Events - Lantronix SLC 8000 User Manual

Events

On this Maintenance > Events
may occur in the SLC unit.
1. Click the Maintenance tab and select the Events option. The following page displays:
2. Enter the following:
Event Trigger
Action
Ethernet
SLC™ 8000 Advanced Console Manager User Guide
page, you can define what action you want to take for events that
Figure 12-13 Maintenance > Events
From the drop-down list, select the type of incident that triggers an event. Currently,
the options are:
Receive Trap

Temperature Over/Under Limit (for Sensorsoft devices)

Humidity Over/Under Limit (for Sensorsoft devices)

Device Port Data Drop

No Internal Modem Dial Tone

From the drop-down list, select the action taken because of the trigger. For
example, the action can be writing an entry into the syslog with details of the event
or sending the trap(s) to the Ethernet or modem connection.
For actions that require an Ethernet connection (for example, Forward All Traps to
Ethernet), select the Ethernet port to use.
12: Maintenance
249