Diagnostics; Figure 12-7 Maintenance > Diagnostics - Lantronix SLC 8000 User Manual

Diagnostics

The Maintenance > Diagnostics
connectivity and device port input/output problems. You can use equivalent commands on the
command line interface.
1. Click the Maintenance tab and select the Diagnostics option. The following page displays:
2. Select Diagnostics from checklist (one or more diagnostic methods you want to run, or select
All to run them all):
ARP Table
Netstat
Host Lookup
SLC™ 8000 Advanced Console Manager User Guide
page provides methods for diagnosing problems such as network
Figure 12-7 Maintenance > Diagnostics
Address Resolution Protocol (ARP) table used to view the IP address-to-hardware
address mapping.
Displays network connections. If you select the checkbox, select the TCP or UDP protocol,
or select All for both protocols to control the output of the Netstat report.
Select to verify that the SLC 8000 advanced console manager can resolve the host
name into an IP address (if DNS is enabled). If selected, also enter a host name in the
corresponding Hostname field,
12: Maintenance
240