Target Data; How To Display Target Data In The Data Display Area; How To Remove Target Data From The Display Area - Furuno FAR-1513-BB Operator's Manual

4.7

Target Data

You can display an AIS target's data by selecting it on the display, when the AIS func-
tion is set for [AIS DISP FILT].
4.7.1

How to display target data in the data display area

Place the cursor on a desired AIS target and press the TGT ACQ key. The target is
highlighted with a square box and the selected AIS target's data is shown in AIS target
data box in the data display area, on the right side of the screen.
Location of target data box
Name of target ship
Bearing to target
Range to target
Target's course
Target's speed
Target's CPA
Target's TCPA
Target's bow cross range
Target's bow cross time
4.7.2

How to remove target data from the display area

Place the cursor on a desired tracked target and press the TGT CANCEL key. The
select target's data is no longer displayed in the data display area.
A
AIS target data box
4. AIS OPERATION
Target's MMSI ID
Target's co-ordinates
Target's nav status
Target's heading
Target's rate of turn
4-9