How To Show/Remove Target Data In The Data Display Area - Furuno FAR-2218 Operator's Manual

3.10.2

How to show/remove target data in the data display area

Place the cursor on a desired tracked target and left-click, or press the ACQ key. The
target's symbol is surround with a broken square and the selected TT target's data is
shown in the data display area.
Note: This feature requires [2 TGT DATA/ACQ SETTING] on the second page of the
[CURSOR] menu to be set as [ANY] or [TT ONLY].
Indication
Target No.
Name
BRG
RNG
T COG
T SOG
CPA
TCPA
BCR
BCT
The number of TT data that can be displayed at one time in the information box de-
pends on your settings for [7 INFORMATION BOX] (see section 1.47).
To remove the target data, place the cursor on a desired tracked target, or the dis-
played data in the data area, then press the TARGET CANCEL key, left-click. The se-
lect target's data is removed from the data display area.
Number assigned by the system to this target. Target numbers which
have become vacant are not re-used until the system is restarted, or the
system tracks more than 100 targets.
Name assigned to this target (B/W-types only).
Note: If the assigned name (see section 3.11) is more than six characters
in length, only the fist six characters of the name appear here.
Bearing from own ship to target in relative (R) or True (T) reference.
Range from own ship to target.
Relative (R) or True (T) Course Over Ground of target.
Displayed as "T CTW" where speed input is set to [LOG(WT)].
Displayed as "R CRS" where speed data is not available.
Relative (R) or True (T) Speed Over Ground of target.
Displayed as T STW where speed input is set to [LOG(WT)].
Displayed as R SPD where speed data is not available.
Closest Point of Approach of target to own ship.
Time to CPA of target to own ship.
Bow crossing range of target.
Bow crossing time of target.
3. TARGET TRACKING (TT)
Target No.
Name
Description
3-11