Setup Wizard - Planet Networking & Communication IVR-100 User Manual

Setup
4.4.1 Wizard
The Wizard will guide the user to configuring the Gateway easily and quickly. There are different
procedures in different operation modes. According to the operation mode you switch to, please follow
the instructions below to configure the Gateway via Setup Wizard as shown in
Step 1: LAN Interface
Set up the IP Address and Subnet Mask for the LAN interface as shown in
Object
IP Address
Subnet Mask
DHCP Server
Industrial 5-Port 10/100/1000T VPN Security Gateway
Figure 4-6: Setup Wizard
Figure 4-7: Setup Wizard – LAN Configuration
Enter the IP address of your Gateway. The default is 192.168.1.1.
An address code that determines the size of the network. Normally
use 255.255.255.0 as the subnet mask.
By default, the DHCP Server is enabled.
If user needs to disable the function, please uncheck the box.
- 39 -
Figure
Figure 4-7.
Description
IVR-100
4-6.