Table of Contents
Advertisement
3.3 Management Methods
The way to manage the Industrial Modbus Gateway:
- Web Management interface
- Remote IP-based Telnet interface
3.3.1 Web Management Interface
The Industrial Modbus Gateway offers management features that allow users to manage the Industrial Modbus
Gateway from anywhere on the network through a standard browser such as Microsoft Internet Explorer. After
you set up your IP address for the Industrial Modbus Gateway, you can access the Industrial Modbus Gateway's
Web interface applications directly in your Web browser by entering the IP address of the Industrial Modbus
Gateway.
You can then use your Web browser to list and manage the Industrial Modbus Gateway configuration parameters
from one central location. Web Management requires either Microsoft Internet Explorer 8.0 or later, Google
Chrome, Safari or Mozilla Firefox 1.5 or later.
3.3.2 Login the Industrial Modbus Gateway Web Interface
The following shows how to start up the Web Management of the Industrial Modbus Gateway. Note the Industrial
Modbus Gateway is configured through an Ethernet connection. Please make sure the manager PC must be set
to the same IP subnet address.
For example, the default IP address of the Industrial Modbus Gateway is 192.168.0.100, then the manager PC
should be set to 192.168.0.x (where x is a number between 1 and 254, except 100) and the default subnet mask
is 255.255.255.0.
Logging in to the Industrail Modbus Gateway
1. Use Internet Explorer 8.0 or above Web browser and enter IP address
Web interface.
2. When the following dialog box appears, please enter the default user name and password "admin". The
login screen in Figure 3-4 appears.
Default Username: admin
Default Password: admin
Figure 3-3: Web Management Diagram
-19-
User's Manual of IMG-120T
http://192.168.0.100
to access the
Advertisement
Table of Contents
