Table of Contents
Advertisement
Chapter 3. WINDOWS CLIENT UTILITY – WIPG
3.1. Starting Program
After installing WIPG (Wireless Interactive Presentation Gateway) utility downloaded from the web page of the
WIPG-300H, please follow the steps below to start.
Step 1.
Click WIPG icon
Step 2.
WIPG will start to search the available access points automatically if you have not connected your
PC to the WIPG-300H manually. When the WIPG-300H is displayed in the list, please click it to
connect and then enter the Login Code shown on the projector screen.
on the desktop to execute the program.
Figure 3-1 WIPG Utility – Access Point Connection
Figure 3-2 WIPG Utility – Access Point Login
16
Advertisement
Table of Contents
