Configuration > Spanning Tree > Stp Instance Settings - D-Link DGS-1210-12TS/ME User Manual

4 Configuration
Figure 4.100 - Configuration > Spanning Tree > MST Configuration Identification
MST Configuration Identification Settings:
Configuration Name: A previously configured name set on the Switch to uniquely identify the MSTI (Multiple
Spanning Tree Instance). If a configuration name is not set, this field will show the MAC address to the
device running MSTP. This field can be set in the STP Bridge Global Set-tings window.
Revision Level: This value, along with the Configuration Name will identify the MSTP region configured on
the Switch. The user may choose a value between 0 and 65535 with a default setting of
MSTI ID (1-15): Enter a number between 1 and 15 to set a new MSTI on the Switch.
Type: This field allows the user to choose a desired method for altering the MSTI settings.
Add VID - Select this parameter to add VIDs to the MSTI ID, in conjunction with the VID List
parameter.
Remote VID – Select this parameter to remove VIDs from the MSTI ID, in con-junction with the VID
List parameter.
VID List (1-4094): This field displays the VLAN IDs associated with the specific MSTI.
Click Apply to make the configurations take effect.
Configuration > Spanning Tree > STP Instance Settings
The STP Instance Settings page display MSTIs currently set on the Switch and allows users to change the
Priority of the MSTPs.
To modify an entry on the table, click the Edit button. To view more information about and entry on the table
at the top of the window, click the view button.
DGS-1210 series Metro Ethernet Managed Switch User Manual
Figure 4.101 - Configuration > Spanning Tree > STP Instance Settings
7 3
7 3
0
.