Dhcp Server Excluded Address Settings; Dhcp Server Pool Settings - D-Link xStack DES-3528 series User Manual

®
xStack DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual

DHCP Server Excluded Address Settings

The following window will allow the user to set an IP address, or a range of IP addresses that are NOT to be included
in the range of IP addresses that the Switch will allot to clients requesting DHCP service. To view this window, click L3
features > D HCP Server > D HCP Server E xclude Address Settings. To set an IP address or range of IP
addresses, enter the Begin Address of the range and then the End Address of the range and click Apply. Set address
ranges will appear in the DHCP Exclude Address Table in the bottom half of the window, as shown below.
Figure 4 - 11 DHCP Server Excluded Address Settings

DHCP Server Pool Settings

The following windows will allow users to create and then set the parameters for the DHCP Pool of the switch's DHCP
server. Users must first create the pool by entering a name of up to 12 alphanumeric characters into the Pool Name
field and clicking Apply. Once created, users can modify the settings of a pool by clicking its corresponding Edit
button. To view the following window, click L3 features > DHCP Server > DHCP Server Pool Settings.
Figure 4 - 12 DHCP Server Pool Settings window
Click the Edit button of a corresponding DHCP Pool will lead to the following window in which users can adjust the
settings for the specific DHCP pool table.
Figure 4 - 13 DHCP Server Pool Settings window - Edit
The following parameters may be configured or viewed.
149