Configuring Supplementary Services - AudioCodes Mediant 500 E-SBC User Manual

User's Manual
26

Configuring Supplementary Services

This section describes SIP supplementary services that can enhance your telephone
service.
Notes:
•
All call participants must support the specific supplementary service that is used.
•
When working with certain application servers (such as BroadSoft's BroadWorks)
in client server mode (the application server controls all supplementary services
and keypad features by itself), the device's supplementary services must be
disabled.
•
The Supplementary Services page is used to configure many of the discussed
supplementary services parameters. For a description of the parameters appearing on this
page, see ''Configuration Parameters Reference'' on page 691.

To configure supplementary services parameters:
1. Open the Supplementary Services page (Configuration tab > VoIP menu > GW and
IP to IP > DTMF & Supplementary > Supplementary Services).
Version 6.8
26. Configuring Supplementary Services
413 Mediant 500 E-SBC