The Character Set Of The Fixed Cycle 225 Engraving Was - HEIDENHAIN TNC 640 User Manual

Fundamentals | New and changed cycle functions of software 34059x-05
New and changed cycle functions of software
34059x-05
New Cycle 880 GEAR HOBBING (software option 50 and
software option 131), See "GEAR HOBBING (Cycle 880, DIN/
ISO: G880)", page 476
New Cycle 292 CONTOUR FINISHING TURNING
INTERPOLATION (software option 96), See "INTERPOLATION
TURNING, CONTOUR FINISHING (Cycle 292, DIN/ISO: G292,
software option 96)", page 323
New Cycle 291 COUPLING TURNING INTERPOLATION
(software option 96), See "COUPLING INTERPOLATION
TURNING (cycle 291, DIN/ISO: G291, software option 96)",
page 333
New Load Adaptive Control (LAC) cycle for the load-dependent
adaptation of control parameters (software option 143), See
"ASCERTAIN THE LOAD (Cycle 239, DIN/ISO: G239, software
option 143)", page 351
Cycle 270: CONTOUR TRAIN DATA was added to the cycle
package (software option 19), See "CONTOUR TRAIN DATA
(Cycle 270, DIN/ISO: G270)", page 246
Cycle 39 CYLINDER SURFACE (software option 1) Contour was
added to the cycle package, See "CYLINDER SURFACE (Cycle
39, DIN/ISO: G139, software option 1)", page 269

The character set of the fixed cycle 225 Engraving was

expanded by the CE, ß and @ characters and the system time,
See "ENGRAVING (Cycle 225, DIN/ISO: G225)", page 340
Cycles 252 to 254 were expanded by the optional parameter
Q439, See "Cycle parameters", page 168
Cycle 22 was expanded by the optional parameters Q401 and
Q404, See "ROUGHING (Cycle 22, DIN/ISO: G122)", page 228
Cycles 841, 842, 851 and 852 were expanded by the plunging
feed rate Q488, See "Cycle parameters", page 417
Cycle 484 was expanded by the optional parameter Q536, See
"Calibrating the wireless TT 449 (Cycle 484, DIN/ISO: G484)",
page 726
Eccentric turning with Cycle 800 is possible with option 50 and
option 135, See "ADAPT ROTARY COORDINATE SYSTEM (Cycle
800, DIN/ISO: G800)", page 366
HEIDENHAIN | User's manual for cycle programming | 10/2017
13