Turning Cycles (Software Option 50); Overview - HEIDENHAIN TNC 640 User Manual

12

12.1 Turning Cycles (software option 50)

Overview

Defining turning cycles:
The TNC offers the following cycles for turning operations:
Soft key Cycle group
Special cycles
Cycles for longitudinal
turning
360
The soft-key row shows the available groups of cycles
Menu for cycle group: Press the Turning soft key
Select cycle group, e.g. cycles for longitudinal turning
Select cycle, e.g. TURN SHOULDER, LONGITUDINAL
Cycle
ADAPT ROTARY COORDINATE SYSTEM (Cycle 800, DIN/
ISO: G800)
RESET ROTARY COORDINATE SYSTEM (Cycle 801, DIN/
ISO: G801)
GEAR HOBBING (Cycle 880, DIN/ISO: G880)
CHECK UNBALANCE (Cycle 892, DIN/ISO: G892)
TURN SHOULDER LONGITUDINAL (Cycle 811, DIN/ISO:
G811)
TURN SHOULDER LONGITUDINAL EXTENDED (Cycle
812, DIN/ISO: G812)
TURN, LONGITUDINAL PLUNGE (Cycle 813, DIN/ISO:
G813)
TURN, LONGITUDINAL PLUNGE EXTENDED (Cycle 814,
DIN/ISO: G814)
TURN CONTOUR LONGITUDINAL (Cycle 810, DIN/ISO:
G810)
TURN CONTOUR-PARALLEL (Cycle 815, DIN/ISO: G815)
Cycles: Turning | Turning Cycles (software option 50)
HEIDENHAIN | User's manual for cycle programming | 10/2017
Page
366
372
476
483
374
375
378
382
385
389
393