13.3 Touch Probe Table; General Information; Editing Touch Probe Tables - HEIDENHAIN TNC 640 User Manual

Hide thumbs Also See for TNC 640:

Table of Contents

13.3 Touch probe table

Various data is stored in the touch probe table that defines the

probe behavior during the probing process. If you use several touch

probes on your machine tool, you can save separate data for each

touch probe.

You can also view and edit the data of the touch probe

table in the expanded tool management (option 93).

To edit the touch probe table, proceed as follows:

Mode of operation: Press the Manual operation

Select the touch probe functions: Press the

TOUCH PROBE soft key. The TNC displays

additional soft keys

Select the touch probe table: Press the

TCH PROBE TABLE soft key

Set the EDIT soft key to ON

Using the arrow keys, select the desired setting.

Perform desired changes.

Exit the touch probe table: Press the END soft

Using Touch Probe Cycles | Touch probe table

HEIDENHAIN | User's manual for cycle programming | 10/2017