HEIDENHAIN TNC 640 User Manual page 14

Hide thumbs Also See for TNC 640:

Table of Contents

New and changed cycle functions of software

New Cycle 258 POLYGON STUD, See "POLYGON STUD (Cycle

258, DIN/ISO: G258)", page 189

New Cycles 600 and 601 for camera-based monitoring of the

setup situation (software option 136), See "Camera-based

monitoring of the setup situation VSC (option 136)", page 656

Cycle 291 INTERPOLATION TURNING, COUPLING (software

option 96) was expanded expanded to include parameter Q561,

See "COUPLING INTERPOLATION TURNING (cycle 291, DIN/

ISO: G291, software option 96)", page 333

Cycles 421, 422 and 427 have been expanded to include

parameters Q498 and Q531, See "MEASURE HOLE (Cycle 421,

DIN/ISO: G421)", page 595

Cycle 247 PRESETTING: The number of the preset can be

selected from the preset table, See "PRESETTING (Cycle 247 ,

DIN/ISO: G247)", page 297

Cycles 200 and 203: The behavior of the dwell time at top was

modified, See "UNIVERSAL DRILLING (Cycle 203, DIN/ISO:

G203)", page 88

Cycle 205 performs deburring on the coordinate surface,

See "UNIVERSAL PECKING (Cycle 205, DIN/ISO: G205)",

For SL cycles, M110 is now taken into account for arcs

compensated on the inside of the arc if M110 is active during

machining, See "SL Cycles", page 216

Fundamentals | New and changed cycle functions of software 34059x-06

HEIDENHAIN | User's manual for cycle programming | 10/2017