HEIDENHAIN TNC 640 User Manual page 625

Touch Probe Cycles: Automatic Workpiece Inspection | MEASURE PLANE (Cycle 431, DIN/ISO: G431)
Q297 3rd measuring point in 2nd axis?
(absolute): Coordinate of the third touch point in
the minor axis of the working plane. Input range
-99999.9999 to 99999.9999
Q298 3rd measuring point in 3rd axis?
(absolute): Coordinate of the third touch point in
the touch probe axis. Input range -99999.9999 to
99999.9999
Q320 Set-up clearance? (incremental): Define
an additional distance between measuring point
and ball tip. Q320 is added to SET_UP in the touch
probe table. Input range 0 to 99999.9999
Q260 Clearance height? (absolute): coordinate in
the touch probe axis at which no collision between
tool and workpiece (fixtures) can occur. Input
range -99999.9999 to 99999.9999
Q281 Measuring log (0/1/2)?: Definition of
whether TNC should create a measuring log:
0: Create no measuring log
1: Create measuring log: The TNC will save the
log file TCHPR431.TXT
TNC:\.
2: Interrupt the program run and display the
measuring log on the TNC screen. Resume
program run with NC Start.
HEIDENHAIN | User's manual for cycle programming | 10/2017
by default in the directory
Q265=+50 ;2ND PNT IN 1ST AXIS
Q266=+80 ;2ND PNT IN 2ND AXIS
Q295=+0 ;2ND PNT IN 3RD AXIS
Q296=+90 ;3RD PNT IN 1ST AXIS
Q297=+35 ;THIRD POINT 2ND AXIS
Q298=+12 ;3RD PNT IN 3RD AXIS
Q320=0 ;SET-UP CLEARANCE
Q260=+5 ;CLEARANCE HEIGHT
Q281=1 ;MEASURING LOG
16
625