HEIDENHAIN TNC 640 User Manual page 560

Hide thumbs Also See for TNC 640:

Table of Contents

Touch Probe Cycles: Automatic Presetting | PRESET FROM OUTSIDE OF CORNER (Cycle 414, DIN/ISO: G414)

Q382 Probe TS axis: Coord. 1st axis? (absolute):

Coordinate of the probe point in the reference axis

of the working plane at which point the preset is

to be set in the touch probe axis. Only effective if

Q381 = 1. Input range -99999.9999 to 99999.9999

Q383 Probe TS axis: Coord. 2nd axis? (absolute):

Coordinate of the probe point in the minor axis

of the working plane at which point the preset is

to be set in the touch probe axis. Only effective if

Q381 = 1. Input range -99999.9999 to 99999.9999

Q384 Probe TS axis: Coord. 3rd axis? (absolute):

Coordinate of the probe point in the touch probe

axis, at which point the preset is to be set in the

touch probe axis. Only effective if Q381 = 1. Input

range -99999.9999 to 99999.9999

Q333 New preset in TS axis? (absolute):

Coordinate in the touch probe axis at which the

TNC should set the preset. Default setting = 0.

Input range -99999.9999 to 99999.9999

HEIDENHAIN | User's manual for cycle programming | 10/2017