Table of Contents
Advertisement
Fundamentals
New and changed cycle functions of software 77185x-02
New and changed cycle functions of
software 77185x-02
Cycle 270: CONTOUR TRAIN DATA was added to the cycle
package (software option 19), see "CONTOUR TRAIN DATA
(Cycle 270, DIN/ISO: G270)", page 207
Cycle 39 CYLINDER SURFACE (software option 1) Contour was
added to the cycle package, see "CYLINDER SURFACE (Cycle
39, DIN/ISO: G139, software option 1)", page 228
The character set of the fixed cycle 225 Engraving was
expanded by the CE, ß and @ characters and the system time,
see "ENGRAVING (Cycle 225, DIN/ISO: G225)", page 282
Cycles 252 to 254 were expanded by the optional parameter
Q439, see "Cycle parameters", page 139
Cycle 22 was expanded by the optional parameters Q401 and
Q404, see "ROUGHING (Cycle 22, DIN/ISO: G122)", page 196
Cycle 484 was expanded by the optional parameter Q536, see
"Calibrating the wireless TT 449 (Cycle 484, DIN/ISO: G484,
DIN/ISO: G484)", page 451
10
HEIDENHAIN | TNC 320 | User's manual for cycle programming | 9/2016
Advertisement
Table of Contents
